|
|
| Camber Kits
> Ingalls Camber Kit Camber Kits
> Mitusbishi |
|
|
Ingalls Camber Kits
Suspension geometry changed because your vehicle has been lowered or raised? Tires wearing out too fast? Hard to handle? Correct these problems by using
Ingalls Camber Kit. These parts have been engineered to accommodate the severe alignment angle changes that occur when a vehicle's suspension height is altered. Click on the make of your ride for an application guide to the parts we have available for you.
Don't see your make or model listed?
Click here to be connected to Ingalls Camber Kits
1
Inch lower = - .80 degree change from stock,
2
Inch lower = -2.0 degree change from stock,
3
Inch lower = -3.8 degree change from stock,
FOR MORE INFO VISIT
INGALLS ONLINE
http://www.ingallseng.com/
|
Free UPS Ground Shipping
in 48 States (Excluding Hawaii and Alaska)
|
All
adjustment ranges are from the stock settings
(I.E. If stock camber is -1.1 degrees then with the (-3/4 to 1°)
kits
you can expect to have -.1 degrees of camber after installation
Kits Below Sold
in Pairs Thus, each camber kit comes with the hardware necessary to
complete both sides of the car on either the front or rear end.
|
Have questions?, click here
|
Which one should I use, polyurethane or rubber?
Polyurethane bushings are
designed for a performance like ride. Polyurethane may squeak if not
properly lubricated. You should use a lubricant that will not wash
away. Once the lubricant is washed out or contaminated from road
grime the lubricant will no longer be effective. This can cause
premature wear on the bushings. You will need to re-lubricate.
Rubber bushings are designed for the "street" use only vehicle. They
provide a more factory like ride. These bushings do not need to be
lubricated, but will not provide you with that "tight" suspension
feel. |
|
Application |
Ingalls Part # |
Degree of Adjustment |
OUR PRICE SHIPPED |
Add to Cart |
|
1995-99
Eclipse Front |
|
|
|
|
|
Front Polyurethane Kit for
1995-2000 Dodge Avenger
1995-1998 Eagle Talon
1995-1999 Mitsubishi Eclipse |
35750
(polyurethane bushings) |
-3/4° to
1° |
$115 |
 |
|
Front Rubber Kit for
1995-2000 Dodge Avenger
1995-1998 Eagle Talon
1995-1999 Mitsubishi Eclipse |
35760
(Rubber bushings) |
-3/4° to
1° |
$115 |
|
|
Front Polyurethane Kit for
1995-2000 Dodge Avenger
1995-1998 Eagle Talon
1995-1999 Mitsubishi Eclipse |
35770
(polyurethane bushings) |
+1.25° to 3° |
$125 |
|
|
Front Rubber Kit for
1995-2000 Dodge Avenger
1995-1998 Eagle Talon
1995-1999 Mitsubishi Eclipse |
35780
(Rubber bushings) |
+1.25° to 3° |
$125 |
|
|
1995-99
Eclipse Rear |
|
|
|
|
| Rear Kit for
1995-2000 Dodge Avenger
1995-1998 Eagle Talon
1995-1999 Mitsubishi Eclipse |
35860 |
-1° to +3° |
$89 |
|
|
2000-up
Eclipse Front |
|
|
|
|
|
Front MacPherson Strut Camber Adjuster for
2000-03 Mitsubishi Eclipse
16mm OE strut to spindle mounting bolts
|
35440 |
± 1° |
$20 |
|
|
Front MacPherson Strut Camber Adjuster for
2000-03 Mitsubishi Eclipse
16mm OE strut to spindle mounting bolts
|
81280 |
up to ± 2° |
$39 |
|
|
2000-up
Eclipse Rear |
|
|
|
|
| Rear Kit for
2000-03 Mitsubishi Eclipse |
35860 |
-1° to +3° |
$89 |
|
|
|
